A 外径 Tubing O.D | B 内径 Tubing I.D | C 缠绕圈外径 Coil O.D | D 缠绕圈内径 Coil I.D |
E 相当大延伸长度 Max Extend Length | F 尾部直管长度 Tail Length(F1F2) | G 螺旋部分长度 Coil part length |
产品订购编号:
CL-WB-0850-6M-T1T2
CL | W WB | 0850 | 6M | T1 T2 |
PU伸缩管 PU coil tube | 空白 不含接头 Blank without fittings | 管子尺寸 Tube size | 管子长度 Tube Length | 尾部直管长度 Tail Length |
W 装接头 With coupler | ||||
WB 装接头+护套 coupler+shield sleeve |
注:护套:一般是橡胶或者尼龙材质,安装与接头和管子的连接处用于保护连接处的管子。
Shield sleeve: Material always be rubber or Nylon, set at the joint of couple and tube to protect the tube at the joint.
众多的颜色选择 The Wide Selection Colors
以上为常规颜色,其他颜色可以根据样品或者PANPONE色卡定制。
Above are general colors, other color can book according to your sample or PANPONE color No.
特性: Feature:
* 良好的螺旋回复记忆性。 Improved coil memory.
* 弹力好,松垂程度少。 Retract faster and better minimal sag.
* 不易绕曲。 Resistant to kinks.
* 耐磨损。 Abrasion resistance.
* 使用寿命长,耐压。 Longer service life,resistant to pressure.
* 工作长度能达到总长的60%。 Working length is approximately 60% of the coil’s length.
提示 HINTS:
1,壁厚和承载物的重力都会影响弹簧管的弹力回复。
A coil’s retract ability is a affected by coil’s wall thickness and the mass weight.
2,缠绕圈直径小,弹簧管会有良好的伸缩性。
Excellent retract ability is affected by the small coil diameter.
3,缠绕圈直径大,弹簧管易于伸展和使用。
The big coil diameter could be easy to stretch and used comfortably.
4,如需要更好更强的弹性,可以将弹簧管的其中一尾端从中间穿过弹簧管,从另一端拉出。(它的工作长度也会相应减短)
If you want a stronger elasticity,let one tail go through the middle of coil,pull it out at another end of coil.(The coil’s working length could be shorter.)