2. 特有热风管弯型设计,可避免粉屑堆积于电热管底引起燃烧。
3. 采用比例式偏差指示温控器,可精确控制温度。
4. 有过热保护装置,可减少人为或机械故障所产生之意外。
5. 外观新颖,外表光亮。
Hopper Dryers
1. Adopt hot air diuser to keep even hot air ow to improve drying eciency.
2. Hot air elbow inlet that can avoid powder piles up to the bottom of the heating pipe and burns on fire.
3. The hopper and spare parts are made of stainless steel to ensure the plastic not be contaminated. 4. The drum and hooper are separated and easily to be cleaned.
5. Adopt proportional deviation temp controller to control the temp precisely.
6. Overheating protection device reduces accidents.
7. Innovative design with sleek appearance.
选购配件
技术参数:
机型 | 容量(kg) | 电热(kw) | 风机(W) | 电源(V) | 外形尺寸(cm) | 底座安装尺寸(cm) | 净重(kg) |
NHD-12 | 12 | 1.8 | 50 | 380/3ф | 64*44*76 | 11*11*ф4 | 22 |
NHD-25 | 25 | 3.5 | 122 | 380/3ф | 76*50*104 | 16*16*ф6.2 | 34 |
NHD-50 | 50 | 4.5 | 157 | 380/3ф | 87*54*121 | 16*16*ф7 | 45 |
NHD-75 | 75 | 6.5 | 246 | 380/3ф | 94*60*131 | 16*16*ф7 | 56 |
NHD-100 | 100 | 6.5 | 246 | 380/3ф | 101*70*141 | 18*18*ф8 | 68 |
NHD-150 | 150 | 9 | 350 | 380/3ф | 110*74*162 | 20*20*ф8.2 | 78 |
NHD-200 | 200 | 12 | 350 | 380/3ф | 118*84*176 | 23*23*ф11.5 | 110 |
NHD-300 | 300 | 15 | 400 | 380/3ф | 142*100*183 | 27.5*27.5*ф12 | 152 |
NHD-400 | 400 | 15 | 400 | 380/3ф | 148*106*202 | 27.5*27.5*ф12 | 170 |
NHD-600 | 600 | 20 | 1000 | 380/3ф | 158*116*240 | 28*28*ф13.5 | 280 |
NHD-800 | 800 | 30 | 2200 | 380/3ф | 177*118*254 | 28*28*ф13.5 | 380 |
NHD-1000 | 1000 | 40.8 | 1100 | 380/3ф | 192*147*327 | 28*28*ф13.5 | 650 |
NHD-1500 | 1500 | 51 | 1500 | 380/3ф | 203*154*385 | 28*28*ф13.5 | 750 |
注:① 干燥机容量以装载尼龙 6 颗粒状原料的质量为标准;
② NHD-1000、1500 外形尺寸包含了支撑脚架的尺寸;
③ 机器电压规格为: 3Φ,380V,50Hz。